-Official product page link-
 
-FEATURES-
	
Supports 10th Gen Intel® Core™ Series Processors
	
Dual Channel Non-ECC Unbuffered DDR4, 4 DIMMs
	
Intel® Optane™ Memory Ready
	
Direct 12+1 Phases Digital VRM Solution with 50A DrMOS
	
Shielded Memory Routing for Better Memory Overclocking
	
Advanced Thermal Design with Enlarged Surface Heatsink
	
Onboard Intel® Dual Band 802.11ac WIFI & BT5 with AORUS Antenna
	
AMP-UP Audio with ALC1200 and WIMA Audio Capacitors
	
Fast 2.5GbE LAN with Bandwidth Management
	
Dual Ultra-Fast NVMe PCIe 3.0 x4 M.2 with Thermal Guards
	
Pre-installed IO Shield for Easy and Quick Installation
	
RGB FUSION 2.0 with Multi-Zone Addressable LED Light Show Design, Support Addressable LED & RGB LED Strips
	
Smart Fan 5 Features Multiple Temperature Sensors , Hybrid Fan Headers with FAN STOP
	
Q-Flash Plus Update BIOS without Installing the CPU, Memory and Graphics Card
 
-SPECS-
Brand : Gigabyte
Model : Z490 AORUS ELITE AC
Form Factor : ATX Form Factor; 30.5cm x 24.4cm
 
CPU : 
Support for 10th Generation :
Intel® Core™ i9 processors
Intel® Core™ i7 processors
Intel® Core™ i5 processors
Intel® Core™ i3 processors
Intel® Pentium® processors
Intel® Celeron® processors
in the LGA1200 package
 
L3 cache varies with CPU
 
(Please refer "CPU Support List" for more information.)
 
Chipset : Intel Z490 Express Chipset
 
Onboard Graphics : 
Integrated Graphics Processor-Intel® HD Graphics support:
	
1 x HDMI port, supporting a maximum resolution of 4096x2160@30 Hz
	* Support for HDMI 1.4 version and HDCP 2.3.
	
Maximum shared memory of 512 MB
 
Audio : 
	
Realtek® ALC1200 codec
	
High Definition Audio
	
2/4/5.1/7.1-channel
	
Support for S/PDIF Out
 
LAN : 
	
Realtek® 2.5GbE LAN chip (2.5 Gbit/1 Gbit/100 Mbit)
 
Wireless Communication module : 
Intel® Wi-Fi AC 9462:
	
Intel® CNVi interface 802.11a/b/g/n/ac, supporting 2.4/5 GHz Dual-Band
	
BLUETOOTH 5
	
Support for 1x1 11ac wireless standard and up to 433 Mbps data rate
	* Actual data rate may vary depending on environment and equipment.
 
Storage Interface : 
	
2 x M.2 connectors (Socket 3, M key, type 2242/2260/2280/22110 SATA and PCIe x4/x2 SSD support) (M2M_SB/M2A_SB)
	
6 x SATA 6Gb/s connectors
	
Support for RAID 0, RAID 1, RAID 5, and RAID 10
	* Refer to "1-7 Internal Connectors," for the installation notices for the M.2 and SATA connectors.
	
Intel® Optane™ Memory Ready
	
M.2 connectors support up to ASPM L1.2 PCIe power management protocols.
 
Memory : 
	
4 x DDR4 DIMM sockets supporting up to 128 GB (32 GB single DIMM capacity) of system memory
	
Dual channel memory architecture
	
Intel® Core™ i9/i7 processors:
	Support for DDR4 5000(O.C.) / 4933(O.C.) / 4800(O.C.) / 4700(O.C.) / 4600(O.C.) / 4500(O.C.) / 4400(O.C.) / 4300(O.C.) / 4266(O.C.) / 4133(O.C.) / 4000(O.C.) / 3866(O.C.) / 3800(O.C.) / 3733(O.C.) / 3666(O.C.) / 3600(O.C.) / 3466(O.C.) / 3400(O.C.) / 3333(O.C.) / 3300(O.C.) / 3200(O.C.) / 3000(O.C.) / 2933 / 2800 / 2666 / 2400 / 2133 MHz
	
Intel® Core™ i5/i3/Pentium®/Celeron® processors:
	Support for DDR4 2666/2400/2133 MHz
	
Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in non-ECC mode)
	
Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules
	
Support for Extreme Memory Profile (XMP) memory modules
	
(Please refer "Memory Support List" for more information.)
 
Back I/O Ports:
	
2 x USB 3.2 Gen 2 Type-A ports (red)
	
4 x USB 3.2 Gen 1 ports
	
4 x USB 2.0/1.1 ports
	
2 x SMA antenna connectors (1T1R)
	
1 x HDMI port
	
1 x RJ-45 port
	
1 x optical S/PDIF Out connector
	
5 x audio jacks
 
Internal I/O Connectors : 
	
1 x 24-pin ATX main power connector
	
1 x 8-pin ATX 12V power connector
	
1 x 4-pin ATX 12V power connector
	
2 x M.2 Socket 3 connectors
	
6 x SATA 6Gb/s connectors
	
1 x CPU fan header
	
1 x water cooling CPU fan header
	
3 x system fan headers
	
2 x addressable LED strip headers
	
2 x RGB LED strip headers
	
1 x front panel header
	
1 x front panel audio header
	
1 x USB Type-C™ port, with USB 3.2 Gen 1 support
	
1 x USB 3.2 Gen 1 header
	
2 x USB 2.0/1.1 headers
	
1 x Trusted Platform Module header (For the GC-TPM2.0 SPI/GC-TPM2.0 SPI 2.0 module only)
	
2 x Thunderbolt™ add-in card connectors
	
1 x Clear CMOS jumper
	
1 x Q-Flash Plus button